The ShadowMusic Web Community

Hi, ive purchased a vox valvetronix tonelab but it is missing the power supply, its 9v with a 4 pin din socket, ive tryed ebay but i just cant find one, i have got a 9v power adaptor but it has a 1.5mm jack plug, im wondering if it is possible to buy a din plug and soldlier it on?
cheers
Neil

http://www.thomann.de/gb/vox_netzteil_fuer_tonelab.htm

This is for the Tonelab LE

roger bayliss wrote:http://www.thomann.de/gb/vox_netzteil_fuer_tonelab.htm

This is for the Tonelab LE

need a cheaper alternative mate, i paid a bit to much for the unit as it is, ive found a plug on ebay for a few quid im just hoping i can alter it
Neil

http://www.mikrocontroller.net/attachment/75331/ToneLabSE_Service_manual.pdf

In above link look for the section marked Power PCB... I think the Tonelab LE and SE use same power supply so this could help you

Looks like it could be +9AC, Gnd and -9AC and possibly a Not care at a guess ! If you open the case up it might give more clues Neil.

roger bayliss wrote:http://www.mikrocontroller.net/attachment/75331/ToneLabSE_Service_manual.pdf

In above link look for the section marked Power PCB... I think the Tonelab LE and SE use same power supply so this could help you

Looks like it could be +9AC, Gnd and -9AC and possibly a Not care at a guess ! If you open the case up it might give more clues Neil.

Blimey Rog! that looks a bit complicated for a wood butcher! lol

Had to bite the bullet, and brought one of ebay for £40 grrrrrrr

Never mind Neil hope you like the Tonelab anyway