Billyboygretsch wrote:Thanks Dave that nylon bush is missing will try and get one
When I discovered my nylon bush wasn't present on the used G&L S-500 that I recently bought, I sent for some from the G&L store, but it's an expensive part at $5.25 + $25 shipping. I complained about the shipping costs for such a small item and customer services sent some FOC. When they arrived (you get a pack of six + six screws) I could see straight away that we can easily make these ourselves. The nylon bush is just a simple tiny little smidge of a ball that slots into the 4mm hole between the hex screw and the trem bar. I think that if you got some 4mm strimmer cord and clipped a 4mm piece off the end and shoved that in, it would do the same job. It's just something that the hex screw can compress against the trem bar without metal on metal. When it wears out you can clip off anther piece from the strimmer cord.
Also, the hex screws are available here the UK from any good engineering suppliers, though the ones I got were black and not chrome and cost pennies. They are 4mm.